The latest firmware for NovAtel OEMV Series of receivers is version 3.700 and is now available for download. This new firmware adds L5 tracking capability to the OEMV3 receiver (requires L5 capable antenna). There are improvements to RT-2 L1TE (single frequency) and ALIGN along with several other improvements and/or changes.
Changes/Improvements in 3.700
- L5 tracking capability has been added to OEMV-3 receivers (OEMV-3, PROPAK-V3, DL-V3)
*requires a L5 capable GNSS antenna - RT-2 L1TE and ALIGN (single frequency) now uses GPS, GLONASS, and SBAS satellites for solution computation
- ALIGN Y-model added to output Master and Remote positions and heading output at both receivers at a max of 10Hz
- The default of HDTOUTTHRESHOLD is now 2 degrees (previously set at 1 degree)
- BLCONSTRAINT command has been disabled
- BETA release support for OmniSTAR G2 library
- HPSTATICINIT is disabled by default. Recommended left disabled until OmniSTAR update
- Dual data input capability for OmniSTAR input, NTRIP and serial port was added
- 20 second hold on RTCAOBS2 messages has been removed
- Fixed magnetic variation in GPRMC log
OEMV firmware update version 3.700 can be downloaded at http://www.novatel.com/Documents/Downloads/updt3700.exe
Alternate download location:
http://www.novatel.com/support/fwswupdates.htm#oemv
Be sure to select the Update Version
Contact us with any questions, or if you need assistance with the firmware installation.